Oh wow. You have so much more wonderful DS9 ahead of you still!
Oh wow. You have so much more wonderful DS9 ahead of you still!
I went on a bit of a YouTube dive yesterday and found a performance or two of Raygun prior to the Olympics. I don’t know much about breakdancing, but she seems legitimately talented.
https://www.youtube.com/watch?v=Kc1dlmWC76g
I like to recommend the episode(s) on John McAfee when people first start Bastards. They’re wild and not nearly as dark/heavy as some episodes can be.
If you want to be able to trim off the ends, I suggest a double fisherman’s instead (aka the double overhand stopper) with both strands (hold them together while you tie and treat them as a single strand).
https://www.animatedknots.com/double-overhand-stopper-knot
With either knot, after you trim, you can melt the ends of the elastic cord. It will “mushroom” a bit, which will also prevent the tips from creeping into the knot and coming loose.
A flat overhand bend in the elastic cord is what I recommend: https://www.animatedknots.com/flat-overhand-bend-knot
Justification:
Simple, not bulky, reasonably secure against shaking loose, and relatively easy to untie.
As suggested in another comment, a double figure eight could be used as well. It will be more bulky and a bit less likely to come loose.
That’s a Highland. A Scottish breed of cattle.
Affectionately known as a “Heilan Coo”
I think we’re saying the same thing?
You have your end grain slab laid on a table in front of you. From left to right divide cut it into parallel pieces (width of these is up to you 2" or 3" is probably fine). With them all laid on the table on their original pattern, rotate or flip alternating slices. Glue it up.
The bigger the wood the more movement it will have. End grain boards like you describe often have their pieces oriented in opposing directions to manage the warping due to expansion and contraction. Plus the more pieces the more glue jointing holding it together.
To provide more stability, you could cut a series of slices and flip every other one such that the curve of the grain is alternating.
I agree that the pulseaudio control panel is the best (graphical) tool for managing different input/output devices are.
For what it’s worth, the SteamDeck is Linux. If something broke for HD2 on SteamDeck, there would be a lot of people discussing it as a major issue.
To expand upon this, if your mic isn’t working in pulseaudio, it won’t work anywhere else. Confirming your input and levels in there is the first step.
Of all the fork shapes, the table fork seems the least useful for its named purpose.
If you’re using Sync there’s an option called “filter user”. Post dot menu / filter / user.
It seems too easy.
I suspect there will be a big offensive push on those planets that will challenge our liberation of them.
HUUUUGE … tracts of land!
I’m sorry to hear you live with that fear everyday.
This implies the existence of ranked, competitive saluting…