I would say we should just implement it in open source software, anonymously, and let them kick rocks.

If they want to press the issue they can go after whoever-it-is for their “slice” of the infringing revenue generated, which is zero dollars and zero cents. If they want to shut down a project we can just pack it up and pop up elsewhere under a new one. Fuck 'em.

It is obviously already possible on a technical level, at least with varying degrees of ease, using modifications to existing tools. Sefan from CNC Kitchen posted a video a while ago where he managed to pull off and test several prints using brick layered perimeters.

And the whole chat censoring thing, and Microsoft doubling down on banning players on all servers for chat content in their own private servers.

That’s the neat part: I don’t.

Not anymore. I scaled back my fast food consumption quite a bit in previous years, but when the prices of everything skyrocketed to absurd levels during COVID I just quit going to fast food places and never looked back. I get Taco Bell or something like, maybe two or three times a year now and that’s usually when I’m on a road trip or something. Otherwise they can get bent as far as I’m concerned.

If I want slop it’s cheaper and honestly also easier to just buy a TV dinner from any of the selection of general goods stores within walking distance of my house and pop it in the microwave. And these days probably faster, too, because I don’t have to deal with the McAttitude or inevitably discover that the fast food place is trying to run with half the staff it’s supposed to have because its franchise owner is a greedy prick, nor have to worry about getting sucked into the thrice-weekly fistfight in the parking lot, nor getting caught in the crossfire because some fuckmuch is salty about not getting enough ketchup packets and decides to shoot up the joint.

It’s satire, but it’s also very, very realistic.

You know how on reddit people used to say “this guy fucks?”

Well, today we found the opposite of that.

1. He is not a sitting president yet.

2. He was not a sitting president when the offenses occurred in 2016, either, when he had yet to be elected. Even if the “presidential immunity” ruling could somehow be twisted to apply to this as if it were an official act, he was in no way shape or form president at that time.

I found some additional articles on what he said about this, and he did indeed flat out say he expects the “other countries” to pay the tariffs. For instance, this.

A sweeping tariff policy will kill two birds with one stone, Trump says: It could find a new source of revenue for the U.S. government, which could offset losses from lowering or eliminating certain forms of income tax, while extracting money from rival governments.

That’s not how tariffs have worked at any point in history.

They all thought the foreign company paid the tariff.

This is probably what Trump thinks, too. I can easily believe he is that stupid.

I’m also wondering just what the fuck Trump and co. are going to do with all the money obtained from these tariffs. Just, like, spend it all on hookers and blow or what? Remember how you all believed this was the party of “low taxes?” Yeah, guess what a tariff is, fuckers.

Just use some lag screws that are, like two feet long. That ain’t going nowhere.

Some people are apparently incapable of learning anything except by rote. To them, every problem or situation has one solution, and they have no answer for any situation that has not previously been explicitly spelled out to them and the solution memorized, and failing that they not only won’t know what to do but they flat out won’t even try. There is no such thing as figuring out a new solution to anything based on logic or deduction. In any process, they will refuse to understand how the result is actually derived from the actions taken, nor what each step does or why it is done.

I’ve had to work with several people like this over the years and it’s both exhausting and infuriating.

In my line of work I have also been forced to interact with people, mostly clients, who cannot understand hypotheticals. Any abstract or non-concrete concept is completely lost on them and worse, usually exposing them to one will make them irrationally angry in response – which they will immediately direct at you, you nerd.

These people are not only allowed to vote, but also drive cars, own firearms, and have children. It’s shocking.

Here’s the problem with that, though. It’s not going to be like there will be roving goon squads going from door to door snatching away your wives and daughters or anything. Even the MAGA-heads are just barely clever enough not to form themselves into any kind of entity that you could physically fight.

Instead, they’re going to chip away at everybody with asinine laws and legislation, selective enforcement and remote harassment, by filing mountains of frivolous lawsuits, etc. They’ll seize property. They’ll get you fired from your job. They’ll kick you off of your health insurance and freeze your bank accounts. Those responsible are never going to actually expose themselves in any capacity in which they can get got, because they’re cowards; they’re going to hide behind their desks and layers of security and fences and metal detectors and cops and the secret service. If it turns to outright violence vis-a-vis war in our own cities, it would be monumentally stupid for them to send troops marching down the street, and they won’t. They’ll just remotely bombard an entire city block and blame all the collateral damage on “leftists” or “wokeism” or whatever. And idiots will believe it, and then blame the victims.

“That’s ridiculous,” you say. “The government would never bomb anyone on US soil.”

You want to bet?

An AC-130U. We can play a game of see how many times you can hit it with the side guns before it lands in the ocean.

Measuring with the printer is an excellent idea. When in jog mode, mine displays the nozzle coordinates right on the screen.

I was considering that a truly dedicated nut could figure out which layer the print failed at (possibly approximately) and hand edit the gcode for the print to just replace all the layers up until the failed one with Z axis move up to that height. I think that would be problematic, though, because on my machine at least the model still being on the bed would definitely be in the way of the print head homing at the beginning of the print, and I don’t know if there’s any way to force it to skip that part of the procedure. Failure seems likely, and the penalty for failure is high.

Just printing the remaining half of the model and supergluing the parts together seems like a better idea.

My Qidi has a heated chamber and can allegedly do it stock, and I’ve had an unopened spool of pure Nylon sitting in the printer cabinet for over a year.

But I’m chicken.

If your nozzle can withstand it, glass filled is way easier to print.

Your slicer should also be able to compensate for this already.

PLA only shrinks about 0.3% which is negligible unless you are designing with super tight clearances. A 6mm hole, for instance, will be out 0.018mm which is probably scraping against the XY resolution limits of most consumer 3D printers anyhow.

Other materials can definitely shrink more. ABS is harder to manage than PLA, but for instance Nylon/PA’s shrink rate is comparatively immense – around 2%. The various engineering polymers that are filled with something like carbon or glass fibers actually tend to shrink less than their raw counterparts.

Image upload limit is 500kb per image

Cripes. I’d dissolve like the Wicked Witch of the West.

If it were me, I probably would not be able to resist the urge to make whatever inserts you develop compatible with a Gridfinity baseplate, because I am that kind of nerd.

To create perfectly console-shaped two dimensional inserts, or at least close enough, I would start by laying each system flat on a piece of paper and tracing around it with a narrow bodied mechanical pencil. Stick this in your scanner and make an image out of it, and then trace over that image at scale in the CAD software of your choice (FreeCAD is… free). This will automatically come with a built in amount of clearance in the amount of half of the width of the body of your pencil.

Just make a flat base with a wall sticking up maybe 2-3mm thick or more if you feel like it, to roughly half the height of each object. You can put some gaps in it if you prefer to have places to grab the item directly.

And for anyone who winds up struggling with this when trying to gauge their own printer, make sure this option is enabled:

This is in Prusa/Slic3r and its derivatives. If this is disabled, the final outer wall perimeter can wind up being pushed out by some fraction of the width of the wall behind it, which will have the net effect of shrinking vertical holes in your model (and other critical clearances in the X/Y dimensions) by an unpredictable amount.

As long as you stay within its plastic deformation limit, “many cycles” should not matter.

PLA’s downfall for flexible design elements is permanent deflection. It cannot be used on anything that is expected to stay in its tensioned state for anything more than a few seconds. This is why PLA works for catapults and toothpick guns and latches that have a single position rest state where the flexible element is relaxed. If you leave it under tension, though, even just for a few hours, it will not spring back fully. Eventually, it just won’t spring back at all.

Through much testing (read: slowly pissing myself off) I determined in the course of developing my Rockhopper that ABS is the best commonly available choice for permanently or semi-permanently loaded printed spring fixtures – at least out of what most normal and sane people can print with their hobby level machines. Even PETG is better than PLA in that respect, but PLA was useless for me.

For what it’s worth, unless I see something especially egregious, I moderate this community based on reports. If no one seems to have an objection with what is posted here I leave it alone.