It looks like the answer is yes - you can grow a normal plant from each leaf!
https://leafandclay.co/blogs/blog/4-basic-ways-of-propagating-succulents
It looks like the answer is yes - you can grow a normal plant from each leaf!
https://leafandclay.co/blogs/blog/4-basic-ways-of-propagating-succulents
Not a succulent expert by any means, but the fact that it’s growing some air roots and the dropped leaves also are trying to root also seems to point to not enough water.
We have a big jade that will air root when it’s too dry. Before it gets to that point it’s leaves will look noticeably less plump.
Succulents do require watering, but it’s very important to not overdo it. Our Jade is probably only watered ever two months or so when it’s outside (on an east facing porch in zone 6) during the summer and even less frequently in the winter. I know it well enough to be able to eyeball the plant at this point.
For better or worse, there are multiple ways of measuring “American Made”. An alternate measure, which probably matters more in this conversation, is “how many people that worked on <product> are American residents”. Here’s a study that tries to rank each model by how much it contributes to the US economy
The vast majority of the development (engineering, planning, purchasing/supply chain, quality, after sales, etc) effort for Honda and VW is overseas, along with most other non-domestic brands. This extends beyond their own employees to their tier 1s. Many OEMs use suppliers that are located geographically close to their development centers.
None of this excuses the domestic OEMs for their abandonment of cars, their endless march to higher and higher average transaction price, or their quality records.
If it’s heat it could also be a cooling thing. If you search the web on your search engine of choice for “<printer name> driver overheat” you’ll see what solutions the community has already come up with.
For everyone following along at home: this website is worth a click if you’ve never seen it before!
Rinsing rice does wonders. Without a rice cooker you’ll need to strain it, but it’s still worth it.
We made rice for years using this method and it is a very reliable cooking method. Rice doesn’t really leave you a lot of wiggle room though, which is where a rice cooker comes in handy. As an added bonus, some rice cookers come with water lines in them. I measure my dry rice into the cooker, rinse using the cooker, dump most of the water out, and fill to the appropriate level.
Different species of rice have very different textures and somewhat (subtle) different flavorss.
Some rice, like basmati, can be cooked using the pasta method (intentionally use way too much water and strain the excess off after the rice is cooked). I guess all rice could be cooked that way, but you would be giving up some starch.
If the print didn’t come off the bed, I don’t think adjusting z-offset will help. As prints get taller, if you’re running into issues with warping the corners will start to curl up.
Your printer definitely missed some x or y steps. Whether that was due to your drivers getting too hot and just that, or the extruder running into the print. Have you ever seen your printer do this:
How did you remove the pineapple last year? Cut the whole stalk off at the plant , right below the pineapple, something else?
It looks like you missed some x and/or y steps, which made the printer lose its orientation and make a lot of spaghetti.
Possible causes usually involve warping, the nozzle catching the wrapped up piece, and then your printer missing some steps.
Have you completed a large print before?
One other thought that occurred to me overnight: you might be asking about FIRE (financial independence, retire early). There are tons of strategies for going about that.
I would caution about moving toward “off grid” type scenarios. Your monthly costs will be less, but you will have significantly higher up front (if buying a new residence) and/or maintenance costs (if buying used and/or when you decide to sell). For example, our water and sewer bill is around $800/year. If anything outside the house fails, the utility company will fix it. My in-laws sold a home in NJ with well water and septic and had to replace their sceptic field before they were able to sell. That set them back somewhere between $30k and $40k. Depending on your goals it could be either an advantage or a disadvantage.
Feedback: your actual questions start about 2/3 down your post. Lead with them next time so we know how to answer better :)
it’s really hard to apply my city-living experience to try to extrapolate what life might be like if I make a goal to buy a small home in Nowheretown, USA to retire in 20 years down the line
We have younger kids, live in a lower cost of area, and bought our house in 2011. Excluding frivolous categories, our top expenses are:
Once the kids are out and we’re retired categories #1 and #4 go away, category #2 will probably get cut in half, and our taxes and insurance are currently well under $4,500/year. Speaking of taxes, mine are capped at a maximum increase of 5% or inflation, whichever is lower. With the housing run-up this has worked out in our favor.
Home expenses are a thing. It’s hard to say how much to budget for that though. Some of it depends on you (eg do you really need to renovate that bathroom in full), your taste, and your budget. I would expect a decent outlay every 5 years or so - roof, brick/siding/exterior work, furnace/ac, driveway etc. The more you’re willing and able to do yourself the better off you’ll be.
You don’t have to be in the boonies to live in a low cost of living area.
If nothing’s changed since you last print, including the filament, I would suspect a jam/clog. Is the extruder clicking?
lol, missed it 😂
Thanks for new and fresh vs old favorite! I posted something similar further down, will be sure to check this out.
Let’s skip favorite and instead answer fun find that I’ve come back to a few times: Brothers of Metal - Kaunaz Dagaz (it is in English, lol). It’s viking metal, and as went through highschool with Blind Guardian and Rhapsody, it’s great to find bands still making banging fantasy metal https://music.youtube.com/watch?v=Nzad__XGDbQ&si=atuCBlgpMSQ9UkRL
I’ve also been a fan of Bloodywood lately. Think an angrier Hybrid Theory Lincoln Park, but from India and with some fusion going on. Machi Bhased is a good toe in the water https://music.youtube.com/watch?v=3kLKYWDQVec&si=xsmCHcr6llZdaAWc as is Dana-Dan: https://music.youtube.com/watch?v=uo6OC34QjY0&si=6SxQ6T9MwvRUdlJF
I’m guessing I’ma green bean that was left to fully mature. Let the green hulls dry out, shell the dry ones like any other bean, and cook them!
Arm band! I have a generic one I got on Amazon and it’s been very handy. It does slowly slide down my arm over 45 minutes or so, but I don’t really know how anything else would do better without being even tighter or having a more grippy material that I don’t really want again my skin.
I wonder how they calculated the range. If it’s representative of the real world drive cycle these will experience, the estimate might not be too far off. A postal route is constant low speed stop and go. Regen is much more effective at higher speeds, so they’re probably dumping most of their kenetic energy to hear via friction brakes. Suspect their drive cycle is going to be something like an endless cycle of 25 kw acceleration, rest, 25 kw acceleration, rest, etc.
I am somewhat tempted to sign up and give it a shot. DDG is pretty solid for me, but it would be interesting to try a search engine where I’m not the product, it is.
Viking metal eh? I recently found Brothers of Metal and they’re banging. What else do you recommend?