Hello, Today I tried to run talos principle 2, but it keeps freezing and eventually crashes during the starting loading screen.

This is one of the few times linux gaming has failed on me recently, so I am quite frustrated. ProtonDB gives it a fairly good rating, so I wonder if some part of my setup is wrong or something.

For distro, I am running Pop OS, and installed it in non-home partition. Could that cause issues?

Any help would be greatly appreciated!

EDIT: Strange behavior is observed. Once I skip the starting loading sequence (the one with e.g. unreal logo), it works flawlessly. I wonder what is happening while they show me corp logos.

  • lime!@feddit.nuEnglish
    5·
    1 day ago

    hardware?

    my experience was also flawless out of the box, on an all amd system.

          • lime!@feddit.nuEnglish
            2·
            14 hours ago

            the discrete GPU in a hybrid system is very tightly integrated. it usually has control of the external display ports, but not the internal display. usually you can’t turn off the embedded GPU at all.

            troubleshooting hybrid graphics can be a nightmare because nvidia won’t tell anyone how they work.

            read through the arch wiki article for an explanation. there are also troubleshooting steps in there, some of which are specific the arch and some which should work on a ubuntu-based system like pop.

  • Lampshade@lemmy.sdf.orgEnglish
    4·
    1 day ago

    It worked for me out of the box with no config changes (ubuntu 24.10, wayland, nvidia 565 driver), but there are some comments on protondb about it crashing if you have an integrated graphics card in your machine.

    Suggested solutions there are either disable the integrated graphics card in bios, or use -preferNvidia launch option (presumably only if you actually have an nvidia card, but no idea, can’t test myself).

    • someacnt@sh.itjust.worksOPEnglish
      3·
      1 day ago

      I found something interesting - it works if I skipped through the company logos on startup. I guess the phase has memory issue or something?

      • zaphodb2002@sh.itjust.worksEnglish
        2·
        36 minutes ago

        Have you tried Proton GE yet? In Chrono Trigger, everything works until you get to a cutscene and then it crashes on standard Proton, I think there’s a codec issue or something caused by the video. Could be something like that.

          • zaphodb2002@sh.itjust.worksEnglish
            1·
            5 minutes ago

            The easiest way is to install protonup-qt, it’s a graphical frontend to manage proton versions.

            Once it’s installed it should be in the Steam compatibility drop-down.