I understand the intent, but feel that there are so many other loopholes that put much worse weapons on the street than a printer. Besides, my prints can barely sustain normal use, much less a bullet being fired from them. I would think that this is more of a risk to the person holding the gun than who it’s pointing at.
There’s a community that builds 3d printed guns, and those don’t last very long either. They’re not printing barrels, they’re just printing the trigger housing and grip. They go out and buy the dangerous bits.
This is all a bit pointless.
Even more pointless when you consider that once you have a 3d printer, you can make a lot of the components for a second 3d printer, and go out and buy the other parts, without ever buying a 3d printer. Now you have two ghost gun machines!! Oh the horror.
A self replicating 3D printer? I like it.
Yeah it’s called RepRap
The reprap movement was exactly that. A self replicating rapid prototyper. While it never reached true replication, it got close enough to cause an explosive growth of the community. That, in turn led to the huge number of low cost suppliers and designs we have now.
As others have said, the RepRap concept was trying to be that. At first the idea was to 3D print as much of the machine as possible, but what it realistically achieved was you would buy metal frame rails, nuts & bolts, the hot end assembly (a glorified hot glue gun), motors, and a controller board (in many cases literally an arduino) and 3D print connectors and bracketry necessary to hold the thing together. Josef Prusa took the “Mendel” pattern Reprap and simplified it into his now ubiquitous upright plate style “Prusa i3” pattern.
I’ve built several 3D printers from “scratch” and at least 20 from kits. My own 3D printer has printed many of its own parts.
This is the reason why I need education. CNc machines are the only tools you need. Fast food is probably just CNC assembled.
It’s all CNC. All the way down. Always was.
Seriously, 3d printers are just CNC machines, they use the same code the mill I use that was built in 1989 uses.
Yes, they added some new g codes for the extruder bit (even that is just used as an axis), but otherwise you could hand code a 3d print. Probably not a good idea, but could be done. CNC is cool
Shhhh dont tell new york that anybody can by a lathe or a mill. Or forbid A CNC
Requiring a backround check for a 3d printer is idiotic at best. Whats next a flat bastard file? You could use it to form metal to make weapons! Not to deburr or make somthing harmless.
THINK OF THE CHILDREN
Will they require a background check for CNC machines and lathes as well?
Routers and lathes, both CNC and manual … and calipers! The name sounds like something to do with bullets and they look like tiny machine guns.
Pretty soon they would have to ban backyard foundries, aluminum cans, molding sand, metal files, and drill bits!
Why them flat bastards!
(A flatbastard is a common file type)
In other news: virtue signaling politicians are considering banning [scary items that their core voters know nothing about] in order to appear tough on crime, while avoiding doing the logical things experts recommend, because that would look bad in the eyes of the voters. Instead the only consequence is extending the stigma related to excons resulting in greater recidivism
Googling 3d printed gun homicide returns a story from Rhode Island in 2020 (where the police can’t figure out if the gun was actually printed), an attempted murder in Reykjavík in 2022, and this story from 2022 that claims a total of 44 arrests were made related to 3d printed guns… world wide https://3dprint.com/291684/3d-printed-gun-arrests-tripled-in-less-than-two-years-3dprint-com-investigates/amp/
In contrast there were 48117 firearms related deaths in the US during the same period.
Maybe statistics and proportions should be a core part of math from an early age?
These guns are increasingly being found at crime scenes. You may not like NY’s solution, but the problem is growing.
I have two issues with your comment, and the tldr is this “I don’t think the problem warrants the resources needed” and “I don’t think the proposed bill will solve anything, problem or not”.
These guns are increasingly being found at crime scenes.
Probably, I don’t have a source for that, but I suspect that you’re not wrong. What I would like to know is the proportions of gun grimes involving 3d-printed guns vs gun crimes in total. I suspect what others have said in this post, about the percentage of gun related crimes that involve 3d-printed guns, to be within a rounding error, to also be correct.
You may not like NY’s solution, […]
It’s not that I don’t like the “solution”. It’s that I don’t accept the proposed ban as being a solution in the first place. I don’t want to come off as being snarky, I just wanted to make sure that my understanding of the word “solution” was correct. English not being my first language, I sometime miss the salient details. So, I took a moment and googled “definition solution”. According to “Oxford Languages” a solution is a means of solving a problem or dealing with a difficult situation.
Can you in all honesty claim, that you believe that limiting acquiring 3d-printing capabilities, in a single state, will reduce the use of 3d-printed parts in gun crimes?
[…] but the problem is growing.
Again, the occurrence of 3d-printed guns or gun parts may be growing, but is it actually a problem big enough that it has to be dealt with? And with the resources necessary to enforce this proposal? Isn’t gun manufacturing already limited? As others have pointed out, why not limit access to other tools you could use to make guns?
As OP pointed out, the intent may be noble, but the attempt is futile.
This is 'murica. we use Webster’s here.
(sorry. couldn’t resist. you are correct. this isn’t a solution.)
Some things cannot be effectively regulated in this manner. At all.
There is simply no way to stop people from building their own 3D printers. There are too many open source designs, and they can be built with very simple parts that are readily available at the hardware store. Most hobbyist-level 3D printers basically come as a kit that they have to assemble themselves anyways. What happens next? Background checks to buy stepper motors? Background checks to buy a microcontroller?
To me this is like trying to mandate government backdoors in encryption algorithms. There is literally nothing that would stop criminals from just using an open source encryption algorithm that doesn’t have a backdoor, so you end up just making it so all legitimate communications are less secure than they should be.
“Three-dimensionally printed firearms, a type of untraceable ghost gun, can be built by anyone using a $150 three-dimensional printer,” Rajkumar wrote in a memorandum explaining the bill. “This bill will require a background check so that three-dimensional printed firearms do not get in the wrong hands.”
… No way an ender 3 is going to produce something that doesn’t blow up in your hand.
so. i suggest people get that 150 dollar lol-printer. Should take care of itself.
If you think people aren’t printing firearms with an Ender 3, you are a fool.
an Ender 3’s print quality is too low to reliably handle any of the critical components, even for one or two uses. something like the defcad AR lower receiver (which is for some odd reason designated as “the firearm” under ATF regulations…) can absolutely be printed, but not reliably by an ender 3- at least not a stock ender 3. (the defcad team was using resin printers for the dimensional accuracy.)
in any case, you can go to any big box hardware store, drop around 30 bucks in plumbing parts and some quality time with a dremel will produce a fully automatic firearm. should we now regulate plumbing hardware?
Someone assassinated the former Japanese PM with a block of wood, two small pieces of pipe, and some simple electronics, and that was extremely advanced for an amateur hand crafted firearm
Spend enough time in the sticks as a teenager and I guarantee a pipe shotgun will basically materialize out of thin air at some point
Hey congress, so uhhh… you can 3d print a 3d printer
Or just buy parts. What are they gonna do? Regulate stepper motors and heater cartridges, and generic microcontrollers?
The cat is already out the bag.
That’s hilarious, assuming they only regulate prebuilts or full kits, all you’d need to do is something like add everything from a voron parts list to your cart to get around it. I wonder if sellers would also be able to offer partial kits to bypass it too (like offering a frame kit, x axis kit, extruder kit, etc and you just add all to cart)
Anything to regulate and restrict the people/end users but not address any real problems in society.
Go after the gun companies, gun lobbies, NRA? No, never. Address housing, income, and educational inequality? That sounds complicated, tough, and expensive.
This has similar vibes to shaming/regulating people for using too much water in their showers and for washing their cars, but when a multi-billion dollar oil company spills millions of gallons of crude into the sea causing years of environmental damage due to negligence, fine them a few million dollars and tell them they’ve been very naughty…
So tired of politicians being in the pocket of Capitalist scumbags.
By that logic, they should ban water pipes to stop people from making water pipe shotguns
Must pass a background check before entering Home Depot.
You mean Crime depot
What the fuck? You dont even need that for buying a fucking knife
I think some people would say the ability to print a gun is more deadly then a knife.
But I kind of agree with you.
If we start licensing people to own stuff that has the potential to do harm, then eventually you are going to run into a never ending list of household items and laws of natural physics:
- Bleach
- Vinegar
- Salt
- Sugar
- Chlorine
- Gas
- Natural gas
- Methane
- Fertilizers
- Electricity
- Paper
- Fire
- Propane
- Etc.
99% of the what I’ve seen is more deadly to the user than to anyone on the receiving end. You’d really be better off with a pipe pistol or shotgun.
But yeah, almost anything could be dangerous depending on how it’s applied.
If you’ve only seen the liberator and the harlot, the hoffman lowers and FGC9_2 0s? Well…
Looked into the ones you mentioned, both require non-printed parts.
Those are better than what I had seen, but aren’t even on the same scale as what someone can make with a mil or a lathe casually in a couple days
Of course they do, but the serialized part that is run through NICs is printable, the rest you can order online or get at home depot.
Of course plastic, extruded or otherwise, is less strong than metal. That wasn’t the question. You can get a good few thousand rounds out of those before they crack and when they do, they crack along a layer and are not “more dangerous for the user” by any stretch of the imagination.
We already do that, with guns. Precendent is set.
The understandable difference being that a gun has but one purpose: Kill people.
Whereas everything else I have mentioned, including 3d printers are multi-purpose. Not intended to kill, but to serve multiple roles.
Though, it is a good point that few devices could be cobbled together to make infinite guns so long as you had material. So I am not saying it isn’t a class of it’s own, just where does the logic end with that point?
Is it only legal for a company to print guns? How does a license alone protect people? I don’t think that is something I could answer.
The thing is, banning guns is giving them an inch. NYC is already trying to grab 3d printers. Hell the ATF infamously made showlaces into unregistered machine guns, and a felony. https://www.everydaynodaysoff.com/2010/01/25/shoestring-machine-gun/
And abroad, the UK went after knives.
Never think they’ll stop at guns, because they won’t. Its slippery slope, but that slope is supported by historical evidence.
Do I need a background check to buy a CNC? Or a lathe?
I mean, kind of, yes. CNCs have been one of the big items for export controls. Especially if they can be used to build weapons, parts for nuclear subs, etc.
Generally speaking, lathes and milling machines must be licensed for export if their accuracy exceeds six microns. Grinding machines are controlled at four microns. The Wassenaar Arrangement controls all machine tools capable of simultaneous, five-axis motion, regardless of machining accuracy.
In the US you don’t need a license to purchase a CNC. Even items with export restrictions like night vision goggles (Under ITAR) can be bought by anyone and shipped to your door. The export controls would only come into effect upon you exporting them.
Just export controls though?
Oh wow, TIL! I guess I’m not surprised, consumer GPS is kneecapped at a lower accuracy for similar reasons
It used to be. It was called selective availability, where the DoD could dial up/down the accuracy for commercial receivers. However, it was discontinued in 2000.
six microns
Given that human chromosomes are on the order of 5 to 10 microns, I am thinking this export regulation doesn’t apply to the hobby market. This is “use the machine in a clean room” level precision.
Besides not needing a license for export controlled items within the country, you don’t need a 6 micron precision lathe
Until you want to replicate your dick
Is this a real problem? How many crimes are being committed with 3D printed guns?
It’s a rounding error… basically just politicians virtue signalling that they’re doing something.
I’m reminded of Leland Yee. California politician who was in favor of gun control all while doing gun running stuff himself. Guess he felt gun control was good for business.
No, but often gun control is an “if it stops even one” type of thing. Most of it is predicated on mass shootings which are .001% of gun violence in an attempt to ban the gun that kills <500 out of 60,000 people a year.
Owning a ghost gun is a crime, right?
Nearly 500 were recovered last year. https://ny1.com/nyc/all-boroughs/public-safety/2023/09/20/nypd-unit-combatting-the-growing-problem-of-ghost-guns
From the picture in that article, those guns would blow up in the shooter’s hand.
What a shame that would be
Owning a ghost gun is a crime, right?
(Ignoring the fact that “ghost gun” is a meaningless and intentionally emotionally charged term)
In New York, yes. In the vast majority of the US, no. It’s illegal to file the serial number off an existing firearm, but 100% legal in most states to manufacture your own unserialized firearms for personal use. Just cannot be sold/transferred.
I’d note the article you linked says nothing about how many of those are actually 3D printed, it is infinitely easier to deface the serial number on an existing firearm than it is to 3D print one.
You can make a gun with anything
Fine, hard mode challenge: tissue paper!
Give me water, corn starch and a hydrolic press
Well, not anything (if you actually think that’s possible, then I have a challenge for you: make a functioning gun out of cheese), but an average hardware store should have everything you need to produce something capable of firing a shot.
Usually part of 3D printed guns aren’t 3d printed. I’d bet you could make a one-time-use gun out of cheese, but the firing pin and springs would probably have to be made of something else to use a traditional round.
If you go with a gunpowder charge ignited with a flame, it’d be much easier. I’m sure there’s even a cheese that could sustain a flame to ignite it with too. You could even make a cheese bullet.
The future of warfare: dairy.
The milk wars Patent pending
I personally have a 3d printed gun that I’ve put a few hundred rounds though and is still holding up just fine 3d printing is plenty strong enough
Oh really? Do you mind telling us how the barrel was 3D printed?
