Hey all,

Been wanting to reduce the amount of waste I generate, and one small way I was thinking of doing so was perhaps by reheating the unpopped popcorn kernels that appear in the bottom of my bowl after making a batch with my air popper.

Would this be safe to do, or is it recommended against? I’d love to reuse them if possible and ensure I have no unneeded waste there, but I also want to make sure I’m not making myself sick by eating something I shouldn’t be.

Thanks in advance!

  • Bizzle@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    5 days ago

    That’s pretty rad 🤔 your concerns are deal breaks for me though.

    I’m interested in the paper bag way, but did you say you put a staple in there? I was under the impression that you shouldn’t put metal in the microwave. You obviously know better than me if you’re doing it, I just want to make sure before I burn my house down.

    • Professorozone@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      3 days ago

      Yeah it’s fine. I actually put two staples in, with a little gap between for the air and steam to come out. In a pinch you can leave the staples out but usually the pressure of the popcorn unrolls the bag and the popcorn comes out.

      I’m actually an antenna engineer (radio frequency/microwave engineer) and I’m embarrassed to say I don’t fully understand it. I’ve seen actual metal racks that come with microwave ovens.

      Theoretically what would happen is currents would flow on the surface of the metal to what we call the skin depth. Since the power level is high, those currents would generate heat. If it’s enough heat the metal could melt or even pop. When this happens it can cause a burn mark and mess up the finish of the interior.

      The other effect would be that the microwaves will reflect off of the staple. Reflected waves shouldn’t really do anything except cause the wave to bounce around in the microwave, which they already do. The inside of the oven is metal after all.

      I think they say not to do it because thin metals can melt or burn. Thick metals might reflect the waves away from where you want them so your food doesn’t cook. Otherwise I don’t see the harm but maybe I’m missing something. I design antennas, not microwave ovens, but from experience I haven’t ever had a problem with the staples.