What actually counts as a copy under the 3-2-1 rule, why a RAID mirror or a snapshot only protects against one kind of failure, and the one-page inventory that exposes the gaps.
Free weekly email with the week’s posts, videos and one tip: https://chartmann1590.github.io/homelab-the-right-way/newsletter/
Disclosure: this is my own article (Charles Hartmann, Homelab the Right Way). Written with AI help and edited by me; the setup described is mine.


But it feeeeels like a backup, and isn’t that what really matters? In my setup I have 3 drives (2x 8Tb, 1x 14 Tb) and I finally have the opportunity to do some consolidation and not just have 3 single drives plugged into a server. Zfs, raid , a dedicated backup drive, but I’m still figuring out what the layout should be.
Put the two 8tb in a mirrored raid so if one fails you keep your data. Use the 14tb as a backup that is left unplugged for longevity.
That would be my recommendation which is similar to what I have (4 x 6 tb for twelve gigs of redundant storage) and a couple of 8tb drives I keep for occasional (monthly or so) archival backup.
I agree. This is also nice because if you need more space in the future you can always add 8TB drives in pairs.
Ha, it absolutely feels like one, right up until a bad sync or a fat-fingered rm hits every disk at once. With 2x8 TB plus a 14 TB, one layout people often land on is mirroring the two 8s (ZFS mirror) for live data and using the 14 TB as a separate backup target (snapshots replicated to it), plus something offsite for the stuff you can’t lose. That gets you redundancy and an actual backup out of the same three drives.