CubitOom@infosec.pub to privacy@lemmy.caEnglish · 9 days agoHow criminals are taking down Flock camerascdn.social.linux.pizzavideomessage-square69linkfedilinkarrow-up1621arrow-down112 cross-posted to: inperson@slrpnk.netDeFlock@sh.itjust.works
arrow-up1609arrow-down1videoHow criminals are taking down Flock camerascdn.social.linux.pizzaCubitOom@infosec.pub to privacy@lemmy.caEnglish · 9 days agomessage-square69linkfedilink cross-posted to: inperson@slrpnk.netDeFlock@sh.itjust.works
minus-squareSirSamuel@lemmy.worldcakelinkfedilinkarrow-up56·9 days agoAnd slower. Great for plumbing, not so much a 3" aluminum post with 1/4" walls But hey, I might be wrong. 30yrs in the trades, but I’ve never tried cutting down an aluminum post with a pipe cutter Also if the method varies from person to person, or one person uses a unique method, it’s easier to get multiple vandalism charges to stick
minus-squareJumi@lemmy.worldlinkfedilinkarrow-up8arrow-down1·9 days agoIt’s only aluminium, you could probably chew through it if you wanted
minus-squarerumba@lemmy.ziplinkfedilinkEnglisharrow-up5·8 days agowet the post with gallium and put a piece of duct tape over it, i’ll fall over in an hour. no tools
minus-square𝕸𝖔𝖘𝖘@infosec.publinkfedilinkarrow-up2·8 days agoWhere would get Gallium? I saw a youtubr video of some dude (mark something, I think) and he did this to aluminium cans. Always wanted to try that.
minus-squarerumba@lemmy.ziplinkfedilinkEnglisharrow-up2·8 days agoAhh, that’s not the hard part; the hard part is how to get gallium without being noticed.
minus-squaremodus@lemmy.worldlinkfedilinkarrow-up4·8 days agoHey, totally unrelated, but how does one cut copper pipes mounted close to the wall?
minus-squareDookieman12@piefed.sociallinkfedilinkEnglisharrow-up1·2 days agoOscillating saw with a semicircle blade and a piece of paneling behind the pipe in case you get squirrelly with it
minus-squareCascadianGiraffe@lemmy.worldlinkfedilinkarrow-up3·8 days agoThere’s a tool that attaches to your drill or impact driver. Kinda expensive, but when you NEED it, it’s worth every penny.
minus-squaremodus@lemmy.worldlinkfedilinkarrow-up1·8 days agoSo throw money at it. Got it. ;) Thanks.
minus-squareCascadianGiraffe@lemmy.worldlinkfedilinkarrow-up2·8 days agoIts a big part of why plumbers cost money. Like the auto shop guys, a lot of money gets spent on tools that get used maybe once or twice a year, sometimes less. But you must own them to do the work.
minus-squareDuamerthrax@lemmy.worldlinkfedilinkEnglisharrow-up3·8 days ago“Oscillating cutters” are good for close cuts in tight spaces.
minus-squaremodus@lemmy.worldlinkfedilinkarrow-up3·8 days agoCool. I saw those at the store when buying drill bits. Didn’t know what they were. Thanks.
minus-squareSirSamuel@lemmy.worldcakelinkfedilinkarrow-up2·8 days agoOh, I should clarify, “the trades” isn’t exclusively plumbing. I can sweat pipes and lay out a house but I’m no expert That being said I always used a little stubby cutter for pipes close to walls There’s other designs, including ratcheting ones that look so much easier than what I used
And slower. Great for plumbing, not so much a 3" aluminum post with 1/4" walls
But hey, I might be wrong. 30yrs in the trades, but I’ve never tried cutting down an aluminum post with a pipe cutter
Also if the method varies from person to person, or one person uses a unique method, it’s easier to get multiple vandalism charges to stick
It’s only aluminium, you could probably chew through it if you wanted
wet the post with gallium and put a piece of duct tape over it, i’ll fall over in an hour. no tools
Where would get Gallium? I saw a youtubr video of some dude (mark something, I think) and he did this to aluminium cans. Always wanted to try that.
Ahh, that’s not the hard part; the hard part is how to get gallium without being noticed.
Hey, totally unrelated, but how does one cut copper pipes mounted close to the wall?
Oscillating saw with a semicircle blade and a piece of paneling behind the pipe in case you get squirrelly with it
There’s a tool that attaches to your drill or impact driver. Kinda expensive, but when you NEED it, it’s worth every penny.
So throw money at it. Got it. ;) Thanks.
Its a big part of why plumbers cost money. Like the auto shop guys, a lot of money gets spent on tools that get used maybe once or twice a year, sometimes less. But you must own them to do the work.
“Oscillating cutters” are good for close cuts in tight spaces.
Cool. I saw those at the store when buying drill bits. Didn’t know what they were. Thanks.
Oh, I should clarify, “the trades” isn’t exclusively plumbing. I can sweat pipes and lay out a house but I’m no expert
That being said I always used a little stubby cutter for pipes close to walls
There’s other designs, including ratcheting ones that look so much easier than what I used